Photo 1 shows the real thing you either love it or hate it.
Photo 2 shows my attempt at the model.
Photo 3 shows the hull skeleton ready to plate and fibreglass.
Photo 4 shows the hull fitted out with prop shafts, and primered.

Photo 1 A start was made to fitting the superstructure. to the deck which was fitted to the hull. Access was inside the saloons.Painting and interior fittings of the saloons had to be done at this stage as they would be inaccessible when completed.

Photo 2 The stern with twin props and rudders in place. Saloon and deck in position.
Photo 3 Most of the inner saloon door and window detail was done on the computer on Open Office Draw program.
Photo 4 You can see at this stage why all interior detail and painting has to be completed first as you cant get at it later.

Further work on superstructure all done in plasticard.
The complicated shapes at the bow were done with plasticard but the nose cone was made from balsa block and hardened with resin.
As the boat was fully Illuminated, all the wiring had to be built in as now way could it be added later.
The Illuminated Royal Iris sign on the top deck and starboard nav light.

Some of the finer detail on the top deck and also method of making 1 metre lengths of rail using the split pins from Display Models.

Various pictures of the completed model.

Just a couple more pictures to finish the blog.