This is my Billings USCG Life boat. Had not installed esc into the finished boat. Had a P94 duel esc operation and P92 power destitution board Component Shop (Action Electronics)units taken from another build shelved as it became to big a job at the time. May finish one day.
The boat has twin props and rudders so with the P 94 unit can run the boat now. Boat is now ready for water tests.
Rick
[{"id":"161944347491","name":"161944347491.jpg","caption":"","url":"https:\/\/it.model-boats.com\/media\/161944347491\/l","thumbUrl":"https:\/\/it.model-boats.com\/media\/161944347491\/s","isImage":true,"ext":"jpg"},{"id":"161944352942","name":"161944352942.jpg","caption":"","url":"https:\/\/it.model-boats.com\/media\/161944352942\/l","thumbUrl":"https:\/\/it.model-boats.com\/media\/161944352942\/s","isImage":true,"ext":"jpg"},{"id":"161944357964","name":"161944357964.jpg","caption":"","url":"https:\/\/it.model-boats.com\/media\/161944357964\/l","thumbUrl":"https:\/\/it.model-boats.com\/media\/161944357964\/s","isImage":true,"ext":"jpg"},{"id":"161944363669","name":"161944363669.jpg","caption":"","url":"https:\/\/it.model-boats.com\/media\/161944363669\/l","thumbUrl":"https:\/\/it.model-boats.com\/media\/161944363669\/s","isImage":true,"ext":"jpg"},{"id":"161944368722","name":"161944368722.jpg","caption":"","url":"https:\/\/it.model-boats.com\/media\/161944368722\/l","thumbUrl":"https:\/\/it.model-boats.com\/media\/161944368722\/s","isImage":true,"ext":"jpg"}]
This is my Billings USCG Life boat. Had not installed esc into the finished boat. Had a P94 duel esc operation and P92 power destitution board Component Shop (Action Electronics)units taken from another build shelved as it became to big a job at the time. May finish one day.
The boat has twin props and rudders so with the P 94 unit can run the boat now. Boat is now ready for water tests.
Rick
The P92 unit was set up with direct battery hookup.With the system working found a switch to use cut a hole in the deck to mount and cut wiring to suit.Test the units again after switch install.Power to the P 92 was right but only one motor worked found a loose wire on the motor fixed that.Tested again a wire came off on the other motor.Took out both motors and put on new wires.Setup complete .
Rick
The P92 unit was set up with direct battery hookup.With the system working found a switch to use cut a hole in the deck to mount and cut wiring to suit.Test the units again after switch install.Power to the P 92 was right but only one motor worked found a loose wire on the motor fixed that.Tested again a wire came off on the other motor.Took out both motors and put on new wires.Setup complete .
Rick
Assistenza Model Boats Website con un abbonamento e sblocca nessuna pubblicità, download di immagini, puzzle passati e altro — a partire da poche sterline al mese.