Ton Class Minesweeper
Follower (6)
- EdWBronze
- NickthesteamSilver
- RNinMunichBronze
- FredBronze
Ton Class Minesweeper
Ed
Ton Class Minesweeper
Sirmar do a Ton Class if they are still going..
If it don't fit, use a hammer to make it fit....
Piaciuto da AlessandroSPQR and Steve P and
Ton Class Minesweeper
Hi Steve,
Ron Dean, of Dean's Marine, offers three possibilities.
1. A 'plan' for £38.50.
But it's more like what I would call a GA, General Arrangement drawing.
There are NO HULL LINES included.
See link 1 below.
2. They also offer a Ton Class FG hull for £85.50.
Link 2 below,
3 A so called Compact kit with hull, laser cut superstructure parts, 'fittings' and running gear; shafts, props, rudder ect. NO MOTOR. For £144.65
Scale 1/96 Length 465mm (about 18 5/16") Beam 86mm Sailing weight 736g
Link 3.
Yer pays yer spondulux and yer takes yer choice😉
Bon chance mon ami👍Keep us advised of progress please🤞
Cheers, Doug😎
https://deansmarine.co.uk/shop/product_info.php/cPath/26_34/products_id/513
https://deansmarine.co.uk/shop/product_info.php/cPath/26_33/products_id/3103
https://deansmarine.co.uk/shop/product_info.php/cPath/10_11/products_id/178
Ron Dean, of Dean's Marine, offers three possibilities.
1. A 'plan' for £38.50.
But it's more like what I would call a GA, General Arrangement drawing.
There are NO HULL LINES included.
See link 1 below.
2. They also offer a Ton Class FG hull for £85.50.
Link 2 below,
3 A so called Compact kit with hull, laser cut superstructure parts, 'fittings' and running gear; shafts, props, rudder ect. NO MOTOR. For £144.65
Scale 1/96 Length 465mm (about 18 5/16") Beam 86mm Sailing weight 736g
Link 3.
Yer pays yer spondulux and yer takes yer choice😉
Bon chance mon ami👍Keep us advised of progress please🤞
Cheers, Doug😎
https://deansmarine.co.uk/shop/product_info.php/cPath/26_34/products_id/513
https://deansmarine.co.uk/shop/product_info.php/cPath/26_33/products_id/3103
https://deansmarine.co.uk/shop/product_info.php/cPath/10_11/products_id/178
Young at heart 😉 Slightly older in other places.😊 Cheers Doug
Ton Class Minesweeper
Ron Dean does a kit, I know it is not what your after.
That's all right, Mr Ryan. My Morse is so rusty, I could be sending him dimensions on Playmate of the Month.
Piaciuto da AlessandroSPQR and Len1 and
Ton Class Minesweeper
Ready for my next project whilst still incapacitated after a knee op.
I am leaning towards a Ton class Minesweeper of the early seventies, ideally the UK HMS Bronington but am struggling to find a plan. Anyone know where I can source one?
Any guidance would be greatly appreciated
I am leaning towards a Ton class Minesweeper of the early seventies, ideally the UK HMS Bronington but am struggling to find a plan. Anyone know where I can source one?
Any guidance would be greatly appreciated
Piaciuto da
Caricamento…