Commenti

Accedi per commentare.

1. martyvz🇺🇸

   Leading Seaman·3 anni fa

   I like working with metal as well as wood, so I made the rear H-bitt on the tug Long Island out of brass. It is through bolted with a backing plate under the deck. Other metal and wood project was a 1" to 1' model of a 24 pounder muzzle loaded gun. Not a boat, but..

   Piaciuto da RNinMunich and Len1 and 1 other
2. martyvz🇺🇸

   Leading Seaman·5 anni fa

   The gearing is 3:1 but with a 12v motor salvaged from a small appliance. (I save everything.) The motor mount, fan, gearing setup, I made from a piece of square aluminum tube of unknown origin. This way the motor did not have to be offset to accommodate the gearing. Working with the two piece ABS hull and other plastic parts was difficult unless you are familiar with this material.

   Piaciuto da chugalone100 and RNinMunich Vedi tutto
3. Newby7🇨🇦Bronze

   Ammiraglio di flotta·5 anni fa

   Great build What was your experience with the kit and build.
   Rick
4. RNinMunich🇩🇪Bronze

   Ammiraglio di flotta·5 anni fa

   Excellent conversion and a fine build Marty 👍
   So what's the power plant now?
   Decaperm with 2.5:1 gearing?
   (I still have one sitting on the shelf😁)
   Cheers, Doug 😎