Elenco porti

LesRo Javelin p

Elencato da zooma ·

Specifiche

Lunghezza della barca
40" (101.60 cm)
Tipo di motore
Brushless
Tipo di propulsione
Direct
Eliche
Single
Max Amps
120A
Tipo di batteria
LiPo
mAh della batteria
7.5Ah (7,500 mAh)
Tipo di elica
2 Blade
Dimensione elica
50mm
Tempo di esecuzione
30 min
Velocità modello
40 km/h (24.9mph)

Foto

Informazioni su questa barca

This is an ex eBay purchase that I have rebuilt and restored to the level shown here.

It is a bit “red” at the moment, but I was hoping to find someone who can laser cut some white lettering to run down the hull sides, the name on the transom and possibly a racing number on the deck to make it look a bit more like an off-shore racer.

Commenti

  1. zoomaBronze
    Ammiraglio di flotta
    Thanks for the link to the graphics supplier Barry, I will take a look to see what I can find locally.
    Bob.👍
    Piaciuto da zooma
  2. BarryS
    Sottufficiale
    Wow, that is almost RED! LOL
    Here in the USA we can use Callie Graphics to have anything you want for lettering
    or graphics of any kind. Just provide them with a digital file and the scale you want.
    I am sure there should be the same kind of thing in your area.
    You can take a look here https://callie-graphics.com
    They are very popular with the aircraft crowd but there are boaters that use them also.
    Barry
    Piaciuto da AlessandroSPQR and zooma
  3. zoomaBronze
    Ammiraglio di flotta
    Pink undercoat gave a nice base for the hand brushed red spirit gloss paint.
    The inside of the hull was hand painted in a spirit based gloss paint to give a uniform appearance to the glass fibre matted and wood finishes.
    Piaciuto da zooma and Trident73 and
  4. zoomaBronze
    Ammiraglio di flotta
    A platform was mounted to hold a pair of LiPo batteries side by side to provide ballast and to balance them in the hull.
    Piaciuto da zooma and Trident73 and
  5. zoomaBronze
    Ammiraglio di flotta
    Internal hull preparation included fitting an alloy water cooled motor mount and aligning the motor before adding glass fibre matting to line the engine bay.
    Piaciuto da zooma and Trident73 and

Delete this post?

Sarà rimosso dal sito.

Scartare questa bozza?

La bozza verrà eliminata e non potrà essere recuperata.

Hai una bozza non completata

Cosa vorresti farne?