Commenti

Accedi per commentare.

1. Rogal118🇬🇧Silver

   Capitano·3 anni fa

   Hi flaxbybuck. The reason that the servo is mounted upside down, was to accomadate the rear towing cabin floor.if the servo was fitted as low as possible into the hull,the right way up , by the time the servo arms were fitted they would have been too high when joined to the rudder shafts. This would have made the floor of the towing cabin to shallow to fit the dummy winch machinery. I think this has been a problem in the past with modellers of this boat, as i have seen a few with the back cabin blanked off with a cover and not showing the winch.this was done on the original craft when the towing winch was not in use. This wasnt an option for me as i always intended to show the cabin open. So when connecting the servo up, i screwed it to a ply base first then screwed the base to the mounting posts, then fitted the push rods into the rudder arms and tightened these to the rudder shafts.i must mention that i switched the radio gear on earlier and centred up the servo before fixing in place.then made sure the 2 rudders were central before the final nipping up of the clamps.
   Hope the explains my weird way of getting over building issues along the coarse of the build.

   Piaciuto da RamseyA and flaxbybuck and 1 other
2. flaxbybuck🇬🇧

   Capitano·3 anni fa

   I have never seen a rudder servo mounted 'upsidedown' before Rogal. Was this arrangement indicated by the plans ? Surely it makes connecting up a bit of a fiddle ? 😉

   Piaciuto da RamseyA and Rogal118 Vedi tutto
3. PeterJ🇬🇧

   Chief Petty Officer 1st Class·3 anni fa

   Looks great.
   😎

   Piaciuto da RamseyA and Rogal118 Vedi tutto
4. Rogal118🇬🇧Silver

   Capitano·3 anni fa

   Hi Tony thankyou for your interest.the figures are from "Battlecraft" as was the flag locker, boat hooks and life rings

   Piaciuto da RamseyA and Len1 Vedi tutto
5. TonyAsh🇬🇧Silver

   Chief Petty Officer 1st Class·3 anni fa

   Somewhat awed by this Rogal. It's absolutely superb! I'll be doing my best to emulate this when I start my RTTL. Incidently where did you get the figures from?

   Piaciuto da Rogal118
6. RNinMunich🇩🇪Bronze

   Ammiraglio di flotta·3 anni fa

   "supa structure", supa boat Rogal👍
   Excellent detailing and finish.
   Well done mate.
   😎

   Piaciuto da Rogal118
7. EdW🇬🇧Bronze

   Commodoro·3 anni fa

   There is a full sized one for sale on the internet, a steal at nearly £200,000 🤣🤣🤣
   
   https://uk.boats.com/power-boats/1944-thornycroft-hs-target-towing-launch-8335204/
   
   It’s even got a workshop and sailing your models would only mean a 30 second walk at the most. Showed it to the wife but not a chance. 😭😭😭

   Piaciuto da Rookysailor and RNinMunich and 1 other
8. Scratchbuilder🇬🇧

   Viceammiraglio·3 anni fa

   Rogal
   Absolute classic.
   Great model and build blog.
   Regards
   Bill.

   Piaciuto da Rogal118