Elenco porti

RV Northern Observer

Elencato da Rudy-M ·

Specifiche

Lunghezza della barca
48" (121.92 cm)
Peso della barca
214g (8 oz)
Tipo di motore
Brushed
Tipo di propulsione
Direct
Eliche
Single
Max Amps
271A
Tipo di batteria
Lead Acid
mAh della batteria
290 mAh
Tipo di elica
314
Dimensione elica
331mm
Tempo di esecuzione
1+ hrs

Foto

Informazioni su questa barca

This is one of the most complex models I have built. From an original Tug, this Research Vessel is equipped with a working gantry and winch, and a port side crane. It is capable of lowering a FPV submarine off the stern, and a shark cage with a diver inside off the port side.
It has a leak in the prop shaft, but a bulk head contains the water in the aft of the hull. A float switch activates the bilge pump (or harsh braking) It has internal, deck and nav lights. An FPV Camera on the bridge and runs on three sets of batteries.
Internal cabin lights can be turned on remotely, but bridge lights are manually turned on.
It has an Amber strobe light for diving operations and a remotely controlled PA system for announcements and warnings.
Power supply:
1. 12V SLA for motor
2. 12V SLA for bilge pump
3. 6V SLA for Lights and RX
Scale is 1:48

Commenti

  1. AlessandroSPQR
    Ammiraglio di flotta
    I like how you divided the power supplies.
    I especially appreciate the separate power supply for the receiver.
    However, I wouldn't just rely on the separation bulkhead and the bilge pump, I would try to solve the problem of water ingress (it can also be difficult).
    Piaciuto da Len1
  2. AlessandroSPQR
    Ammiraglio di flotta
    Hi CTSMBC, this model has really interesting electronic equipment, you can't help but show us a video!
    Piaciuto da Len1

Delete this post?

Sarà rimosso dal sito.

Scartare questa bozza?

La bozza verrà eliminata e non potrà essere recuperata.

Hai una bozza non completata

Cosa vorresti farne?