Elenco porti
Springer #4 USACOE Stoplog
Specifiche
- Lunghezza della barca
- 14" (35.56 cm)
- Tipo di motore
- Brushed
- Tipo di propulsione
- Direct
- Eliche
- Single
- Tipo di batteria
- LiIon
- mAh della batteria
- 286 mAh
- Tipo di elica
- 3 Blade
- Dimensione elica
- 40mm
- Tempo di esecuzione
- 358 min
- Velocità modello
- 363 km/h (225.6mph)
Foto
Informazioni su questa barca
This is my fourth Springer tug. It was built to resemble the U.S. Army's Corps of Engineers stoplog tug located at Little Goose Dam in Washington State. The scale is about 1/17. The model had to be modified slightly because the length to beam ratio between the real tug and a Springer are slightly different. This keeps the model within the Springer class rules.
Piaciuto da
Caricamento…
Commenti
Accedi per commentare.
I built four Zippkits Springers and did the same hull finish for each. Sanded, coated with spar varnish (brushed on) filled voids with Testors model filler (JB Weld, or others should work), sanded, filled, varnished again until finish was acceptable. Sprayed on paint, usually Rustoleum (sometimes Walmart brand). For hulls and decks I go with the standard hardware store spray paints, no need to go expensive. Protects the hull just fine!
Hope this helps.
Lew 😮