Elenco porti

Graupner Glasgow paddle tug

Elencato da Oxford-Dave ·

Specifiche

Lunghezza della barca
35" (88.90 cm)
Tipo di motore
Brushed
Tipo di propulsione
257
Tipo di batteria
LiFe
mAh della batteria
288 mAh
Tempo di esecuzione
1+ hrs

Foto

Informazioni su questa barca

This model is one I have wanted for years, but I thought I'd never find one after Graupner folded.
However, I found this on ebay and it was only a little over an hour's drove to collect it (I couldn't imagine the damage a courier would do to a boat this heavy & fragile).
On getting it home, I replaced the radio with one of my own, and took it to the Oxford Model Boat Club's regular Sunday morning meeting. It floated well and at the water line, and the paddles turned, but far too fast. The 6v lead acid battery was refusing to hold charge so it was replaced with a NiMH.
On checking the boat over when I got home I found it to be completely dry inside, which was a relief, and on checking the motor it was an MFA geared 540, with a ratio of 2.5:1 at the output shaft, which then drove the paddles through a further 3:1 geared reduction.
After a little thought, I drove over to my local model shop (Howes) and bought two more MFA geared 540s, one at 11:1 and the other at 6:1. I decided to fit the 11:1 first, and next time out with the new motor and a good 6 cell NiMH pack, the Glasgow performed perfectly. Much easier throttle control with the higher gearing. The boat makes headway even when the paddles are revolving so slowly that I can see each individual paddle.
The boat needs a bit of attention to the details, but that will be done over the winter.
Overall, it was worth waiting for, though I am sure I'd have appreciated had it fallen into my lap earlier.

Commenti

  1. chugalone100Silver
    Ammiraglio di divisione
    Ebay is the place to hunt.
    I personally love all the wooden ships from Imai (also folded)
    Checking every day is the way I have found my most valuable models.
    😎
    Piaciuto da Oxford-Dave and Wolle
  2. Oxford-Dave
    Sottotenente
    Phil H - the Glasgow is about one metre in length, but surprisingly heavy. I need to make a new stand for it as I am concerned that it will fall from the the current static display stand when I carry it to the lake.
    Piaciuto da chugalone100
  3. Oxford-Dave
    Sottotenente
    Jumpugly - I haven't heard anything about the fate of the Graupner designs. I know that Krick has acquired some of the Robbe designs and are reissuing them under the Krick/Ro-Marin brand.
    I hope that someone can revive the Graupner boats as they were good models.
    Piaciuto da chugalone100
  4. jumpuglyGold
    Ammiraglio di flotta
    What a Beauty Dave!!! Always great grabbing that one dream kit!
    Just got me thinking…Did Krick grab all the Robbe and Graupner plans, patterns, and molds?
    Piaciuto da AlessandroSPQR and Cashrc
  5. PhilH
    Tenente comandante
    Great looking boat i would love to own one myself what is the length of the boat
    Philuk👍
    Piaciuto da jumpugly

Delete this post?

Sarà rimosso dal sito.

Scartare questa bozza?

La bozza verrà eliminata e non potrà essere recuperata.

Hai una bozza non completata

Cosa vorresti farne?