Commenti

Accedi per commentare.

1. Martin555🇬🇧

   Ammiraglio di flotta·7 anni fa

   Hi Bryan,
   You will still need to keep the weight down low in you'r Shark.
   Also if you have the room you could always put the electrics in a small resealable sandwich box to stop it getting wet.
   
   Martin555.

   Piaciuto da marky
2. Bryan-the-pirate🇬🇧

   Midshipman·7 anni fa

   What a great idea 👍, I will put in some foam. I have put the electrics up high now to avoid ruining them but the servo and battery are in the bottom.

   Piaciuto da Martin555
3. Martin555🇬🇧

   Ammiraglio di flotta·7 anni fa

   Hi,
   That was not good, maybe it will be worth trying to put some extra floatation foam in just incase something similar happens again.
   
   Martin555.
4. Bryan-the-pirate🇬🇧

   Midshipman·7 anni fa

   Last Sunday our group held a Goofy boat competition. I entered my shark and we showed our boats on a table. All was good so it was to the water for the float off.
   
   Jaws was bombing around with the others having a good time as we awaited the judge coming to the water. One of the lateral fins hit the pontoon and was dislodged causing a major leak. I recovered the shark and emptied it, gave it a quick test then put it back in as the judge arrived. Jaws shot off then stopped. Unpowered and filling up it was nudged by another vessel which knocked the dorsal fin off. The good news the dorsal fin floats and looked quite good on the water, the bad news was shark was filling up rather quickly. I borrowed a rowing boat and got back to the scene as the shark was rescued by some other vessels and pulled onto the jetty. The inside was totally awash and I was lucky it didn't go down.
   
   I dried all the electrics and am pleased to say the only things destroyed were a servo and my pride.
   
   The fin has been replaced and lots of glue has been used inside and out to avoid the same happening again.

   Piaciuto da Martin555
5. Martin555🇬🇧

   Ammiraglio di flotta·7 anni fa

   Looking forward to seeing the photos.
   
   Martin555.

   Piaciuto da Bryan-the-pirate
6. Bryan-the-pirate🇬🇧

   Midshipman·7 anni fa

   Now repainted topsides with the gills still to do.

   Piaciuto da Martin555
7. Bryan-the-pirate🇬🇧

   Midshipman·7 anni fa

   Yes they look great👍

   Piaciuto da Martin555
8. Bryan-the-pirate🇬🇧

   Midshipman·7 anni fa

   It is a quick and dirty set up I will secure the esc and reciever once float tested and when I decide where to stick them (with velcro). As you can see rudder servo needs a linkage.
   
   The majority of the shark is above surface so won't dive but is just a funny boat really. The maker builds planes I'm told so the inside resembles a plane body.

   Piaciuto da Martin555
9. Martin555🇬🇧

   Ammiraglio di flotta·7 anni fa

   So it's a two channel surface runner.
   I like it!
   
   Have you seen my steampunk Pike and Evolution ?
   Similar!
   
   Martin555.
10. Bryan-the-pirate🇬🇧

    Midshipman·7 anni fa

    A lot like this

    Piaciuto da jbkiwi and Martin555 Vedi tutto