Elenco porti
EezeBilt Beaver Tug 50+ Challenge
Foto
Informazioni su questa barca
This was my first build venturing into the RC Boat realm.
Plans were downloaded from the KK EezeBilt website.
Construction is of 1/8" Balsa throughout.
To waterproof the hull, I sprayed it with automotive undercoating on the outside, then painted with a latex paint.
The model seemed to be very lightweight, and with the flat bottom didn't draft very low in the water. I added about 1-1/2 to 2 lbs of plaster of paris to the main hold giving it added weight.
I need to shoot a new video of it in the water.
Plans were downloaded from the KK EezeBilt website.
Construction is of 1/8" Balsa throughout.
To waterproof the hull, I sprayed it with automotive undercoating on the outside, then painted with a latex paint.
The model seemed to be very lightweight, and with the flat bottom didn't draft very low in the water. I added about 1-1/2 to 2 lbs of plaster of paris to the main hold giving it added weight.
I need to shoot a new video of it in the water.
Piaciuto da
Caricamento…
Commenti
Accedi per commentare.
And a hearty welcome to our happy band of nutters😊
Cheers, Doug 😎
Yes, I wish I had found this site sooner. I found the KKEezeBilt site back in 2012, and have gone back to it and the Marinecraft site many times. I enjoyed reading about his childhood adventures at the school pond.
For a first RC model it is great Well done.
Martin555.