Elenco porti

1. Sylvie (ex Lotse / Graupner)

Elencato da Mike Stoney ·

Specifiche

Lunghezza della barca
17" (43.18 cm)
Peso della barca
198g (7 oz)
Tipo di motore
Brushed
Tipo di propulsione
Direct
Eliche
Single
Tipo di batteria
LiFe
mAh della batteria
286 mAh
Tipo di elica
312
Dimensione elica
326mm
Tempo di esecuzione
356 min

Foto

Informazioni su questa barca

A pilot ship built by Graupner in 1987 and brought to life again this year!
Picture nr. 4 is the original from Graupner. I rebuilt my boat a bit, it was too simple for me,
with stand and headlights that can be switched on and off.
Data and pictures will follow . . .
Greets Mike

PS: The second last picture is actually the original from Graupner. So you can see what I have changed. My boats shouldn't be 0/815 models.

Commenti

  1. Mike StoneyBronze
    Ammiraglio di divisione
    Hello model friends,
    The repair on this boat has been successfully completed and is now ready for the test run.
    I have also replaced the controller with a Spektrum DX4e.
    This means that my grandchildren and family members will be able to cruise around when other of my boats are already in the water.
    Now the sailboat will experience the same, but there are a few problems to be solved.
    Swiss motto: “Grind abe and dure”
    translated for you : “Head down and through!”
    Until the next report, see you there

    Your Michel-C.
    Piaciuto da Len1 and hermank
  2. Mike StoneyBronze
    Ammiraglio di divisione
    Hi Alessandro,
    This is a relay for the lighting etc, from the 1980/90s, you could buy it from Conrad and assemble/solder it yourself!
    Why remove it? It still works perfectly!
    😊😊 Michel-C.
    Piaciuto da hermank and Len1 and
  3. AlessandroSPQR
    Ammiraglio di flotta
    Hi Mike, great family boat.
    What are those ICs behind the potentiometers and between the capacitors on the bow for?
    Piaciuto da Len1 and hermank and
  4. Mike StoneyBronze
    Ammiraglio di divisione
    Hello everyone!
    First of all, a Happy New Year to all of you with all the trimmings !!
    Tonight I finished my radar project. Because of the lack of space I had to think about how and where I should place the engine. Since the last space in the fuselage is fully booked, the cabin had to believe in it.
    In any case, it was a tinkering with success.
    Years ago, I removed the motor with reduction from a decommissioned credit card reader, so that the radar's concentricity only roughly corresponds to 1.5V = fed.
    See for yourself. . .
    Greetings from hobbyists
    Michel-Claude
    Piaciuto da Len1 and EdW and

Delete this post?

Sarà rimosso dal sito.

Scartare questa bozza?

La bozza verrà eliminata e non potrà essere recuperata.

Hai una bozza non completata

Cosa vorresti farne?