#5995

zooma United Kingdom Bronze

Ammiraglio di flotta  · 10,120 pt Rossendale, Lancashire, United Kingdom Membro dal Set 2020 Ultimo online 57 minuti fa Età 77

Informazioni

Been making r/c model power boats since the 1960's - and riding off road bicycles even longer!

Firma

Never too old to learn

zoomail porto di ’

20 barcas

Vedi tutto 20 barche →

zoomai build blog di ’

15 blogs

Vedi tutto 15 blog di costruzione →

Follower

10 followers

Caricamenti recenti

Attività più recente

Ultimo invio 2 ore fa
Harbour commentRe: Sprite Plus@ChrisF I agree and really like the way that you extend the keel to support the rudder - far better than the traditional method of just drilling though the keel and clamping the axle sleeve as tightly as possi…Harbour commentRe: Aerokits Sea Nymph.I also have a new and original Keil Kraft made rudder assembly to fit this kit. When I first saw this new rudder assembly, I thought that the tiller arm was missing, but these early rudders were intended to ha…Rudder fits original Sea Nymph plan.New original rudder assembly.Instructions on the back of the pack show how to bend the pivot axle to fit the ratchet.Harbour commentRe: Aerokits Sea Nymph.@ChrisF Yes the wood does look good Chris. I paid too much for the kit (I could have had a new reproduction laser-cut copy kit for the same money) - but I like the original old saw-cut kits and enjoy building …Build blog commentRe: build blogHi Harry, I like the modified front cabin roof that the original builder changed by making it more angled and ending higher and closer to the underside of the front cab window. The cabin roof would be flat if …Build blog commentRe: build blogThat looks "interesting" Harry. Even the keel is twisted and delaminated , although it is not fuel soaked......and it is always good to look for the positives when faced with a restoration like this. Good luck…Harbour commentRe: Aerokits Sea Nymph.The kit box was opened and the contents look to be clean and complete, the paper plan shows its age and its originality, so despite this kit not being water stained and damp (the classic signs that we have tra…Box and plans all look very original.No water stained warped wood.Harbour commentRe: Sprite Plus@ChrisF I always use a ball jointed rod end on my push rods, so any small disparity between the vertical movement of the servo arm and the horizontal movement of the tiller arm is either accommodated or minimi…Harbour commentRe: Aerokits Sea Nymph.Missing Parcel. This kit has finally been safely delivered after the Royal Mail parcel delivery service went rogue. When checking the tracking number provided, Royal Mail claimed to have tried to deliver but c…Original kits from late 50's or early 60'.Lifting the lid shows the original neatly packed contents.Harbour commentRe: Sprite Plus@Madwelshman Morning Will, The idea has worked well since I first used it on Rapier 1, and that model has clocked-up over 100 hours of fast cruising and the servo has remained firmly in place. Although a very …Harbour commentRe: Sprite PlusAfter cutting out the mast and cockpit fly screen frames, I cut and fitted the heavy duty servo retaining blocks to house the Volz rudder servo. A retaining top cap was cut from ply skin to keep the servo in p…Heavy blocks mounted on keel to retain steering servo.Ply skin covering cap between servo mounting blocks.Servo retaining cap retained with small screws.

Delete this post?

Sarà rimosso dal sito.

Scartare questa bozza?

La bozza verrà eliminata e non potrà essere recuperata.

Hai una bozza non completata

Cosa vorresti farne?